M11 Turbine Aeroplane Structures & Systems Sub-Module No 7 (Quiz No:1)

Equipment and Furnishings

Quiz

1 / 10

1. These are pertaining to large commercial aircraft ?
   1.   CS-23
   2.   CS-25
   3.   CS-27
2. ………….Is the fore and aft distance between two rows of seating ?
   1.   Track
   2.   Pitch
   3.   Gap
3. The black boxes that contain avionics computers are located on a rack in __________?
   1.   Electronic bay
   2.   Equipment bay
   3.   Airframe bay
4. A primary function of the----------------is to ensure all of the required equipment is in its specified location and serviceable ?
   1.   Aircraft operator
   2.   Manufacture
   3.   Technician
5. Air stairs are typically an------------------ deployed set of stairs stowed under the main cabin floor which extend out the fuselage from below a cabin door to the ground ?
   1.   Hydraulically
   2.   Electrically
   3.   Pneumatically
6. To receive an airworthiness certificate, the manufacturer is required to make provisions for------------ extinguishers on a 650-seat aircraft ?
   1.   Six
   2.   Eight
   3.   Ten
7. The tracks allow adjustment of seats forward and aft ?
   1.   2 inch increments
   2.   3 inch increments
   3.   1 inch increment
8. To receive an airworthiness certificate, the manufacturer is required to make provisions for------------ extinguishers on a 250-seat aircraft ?
   1.   Six
   2.   Two
   3.   Four
9. A ----------------------for each seating class is required ?
   1.   Lavatory
   2.   Galley installations
   3.   Ovens and heating devices
10. It is typical for seats used in 1st class and business class to be----------------- than coach seats ?
    1.   Smaller
    2.   Larger
    3.   Same