Showing posts with label Airframe Structures. Show all posts

Aircraft Basics // Aircraft Wings // Aircraft Structure

August 22, 2021 Aircraft, Airframe Structures, General Knowledge

Aircraft Basics Parts, Aircraft Wings Types, and wing Construction, Aircraft Structure main parts name

Wing Flexing

June 02, 2021 Airframe Structures, boeing 787, cantilever beam, Structures & Systems, wings

Many of us may have a chance to sit near the window seat while traveling on an airplane. It may have come to your notice that the wings of airplanes oscillate during flight. This oscillation turns more frequent if the airplane meets turbulence at some point in the flight. Passengers near a window may feel upset by observing this situation thinking that it could lead to some kind of catastrophe. Ever wondered why wings vibrate during flight despite the fact airplane is worthy to take flight and you think there may be some problem within the airplane?

Image: NASA

Out of four basic forces; which make flight possible, lift and weight are the two forces faced by the wings. Lift acts upward while weight acts downward. Both forces are opposite to each other and act perpendicular to the ground. If lift force is greater than weight, the aircraft moves up in the air, and when weight force outnumbers the lift, the aircraft descends.

During the flight, ascending and descending loads are solely taken by wings. In doing so wings oscillate to accommodate load variations that provide a smoother ride in turbulence, this is Wing Flexing. 

Let's look at wing flexing in the following way to understand it better. Hold a wooden stick in the hand and suspend some weight on the other side, hey, you have just formed a cantilever beam. Well, while the suspended weight comes to rest, you will observe oscillation in the stick and feel vibration at the other side of the stick which is your hand, the rigid point. If a load of suspended weight is greater than the stick's capacity to hold, the stick will break off. If you want to increase the capacity of the stick to hold more load at the free end, you have to increase its stress vs strain yield point. These properties are related to the characteristics of the materials and are developed by manipulating the compositions of the materials. 

Cantilever Beam

Wings are also just like cantilevered beams. One end fixed with the fuselage and the rest part bears aerodynamic loads which definitely shared across the wing. The wing requires a specified ultimate strength that translates into a given amount of flex. This can be varied within limits, but it is really the material, its stiffness to yield point ratio, and its fatigue properties, that control how much flex you are going to end up with. 

The Boeing 787 is the world's first plane made using carbon composites, to reduce weight and increase fuel efficiency. As the wings are not made of metal, but rather composites, which are strong but flexible, they don't have the same kind of stiffness as metal wings. Consequently, the wings tend to bend upwards while carrying the weight of the plane during flight.

What is Open and closed bends // How To calculate Open and closed bends

May 22, 2021 Aircraft, Airframe Structures, M6 Materials, M7, Module 11 Aeroplane Aerodynamics

Open and closed bends

present unique problems that require more calculations than 90° bends
For any bend, we calculate the following:-
K factor
Setback
Bend Allowance
Flats
Total Development Width (TDW)

K-Factor

Look up K-Factor from the ‘K-Factor Chart’
45° = 0.41421 inch
Set Back
Set Back (SB) = K (R + T)
SB = 0.41421 (0.1875 + 0.050)
SB = 0.098 inch

What Is Lift ? How Aircraft Fly

May 16, 2021 Aircraft, Airframe Structures, M11, M11 Aeroplane Aerodynamics

Lift

Force perpendicular to relative airflow and acting opposite to the force of gravity.

Aerofoil

is a curved or cambered surface designed to produce lift when driven through the air.

Bernoulli's

The principle states that within a steady airflow of constant energy.

Important and Basic Aviation Definitions

May 11, 2021 Aircraft, Airframe Structures, AVIATION

Certifying staff:

personnel responsible for the release of an aircraft or a component after maintenance.

Component:

any engine, propeller, part, or appliance.

Continuing airworthiness:

all of the processes ensuring that, at any time in its operating life, the aircraft complies with the airworthiness requirements in force and is in a condition for safe operation.

Main Parts Of Aircraft Fuselage, wing, Aileron, Elevator, Rudder ,Flaps, and Landing Gear

May 10, 2021 Aircraft, Airframe Structures

The main flight control surfaces on a fixed-wing aircraft include:

1.   Ailerons
2.       Elevators
3.       Rudder

Ailerons (longitudinal axis)

The Primary Control surface ailerons are attached to the trailing edge of both wings and when they move, they rotate the aircraft around the longitudinal axis. (longitudinal axis)