Part 66 Preparation

Avionic General Text Equipment

BITE are abbreviated for ?
1. Browser Integrated Testing Environment
2. Built In Test Equipment
3. Body In Test Equipment
Built in test equipment is a common feature on all ?
1. Older Aircraft
2. A320 Aircraft
3. Modern Aircraft
BITE displays are selected on the central maintenance computer ?
1. Multi Function Display
2. Eicas
3. Control Display Units
In most aviation maintenance operations, electronic troubleshooting and repair of avionics line replacement units are performed by the ?
1. B-1.3 Technician
2. B-1 Technician
3. B-2 Technician
Sends BITE maintenance data to the ground maintenance station through ?
1. ADF
2. FMS
3. ACARS
The maintenance function of BITE is accessible only when the aircraft is ?
1. On The Ground
2. In The Air
3. On The Ground And In Air
All troubleshooting and testing of aircraft electronic equipment is…………...By built in test equipment ?
1. Performed
2. Not Performed
3. Only Performed
This allows the technician to test the suspected unit while it is installed ?
1. Fixed Avionic Test Equipment
2. Avionic Test Equipment
3. Portable Avionic Test Equipment
The on-screen display of faults and corrective actions, can be ?
1. Only Printed
2. Printed Or Electronic Downloaded
3. Electronic Downloaded
Acars stands for ?
1. Aircraft Communications And Reporting System
2. Aircraft Communications Addressing And Reporting System
3. Aircraft Communications And Recording System

They are used to hold objects and make adjustments in tight places ?
1. Needle nose
2. Round nose
3. Duckbill
This type of plier is used exclusively for twisting safety wire ?
1. Round nose
2. Duckbill
3. Needle nose
The -------, is required on one special type of recessed screw ?
1. Allen wrench
2. Adjustable wrench
3. Socket wrench
The ---- are designed to fit on a nut, bolt head, or other object, which makes it possible to exert a turning action ?
1. Screw drivers
2. Pliers
3. Wrenches
Extreme caution must be exercised when using any------------------------?
1. Hand tool
2. Power tool
3. Electric tool
The portable, air-powered reciprocating saw uses a standard---------------------?
1. Hacksaw blade
2. Circular blade
3. Angled blade
------ utilize a high speed blanking action to cut the metal ?
1. Notcher
2. Portable nibblers
3. Burring tool
A circuit that is not a complete or continuous path. It represents an infinitely large resistance ?
1. Short circuit
2. Continuity
3. Open circuit
This instrument provide its own source (self-excited) of power and contains other auxiliary circuits ?
1. Ammeter
2. Ohmmeter
3. Voltmeter
For a capacitor if a problem is suspected, remove the capacitor from the circuit and check with an------------?
1. Ammeter
2. Volt meter
3. Ohmmeter

Turboshaft Engines

The turbo shaft engine’s output is measured in ?
1. Horsepower
2. Thrust
3. Shp
The primary purpose for turbo shaft engines in aviation is their use as the main power plant for ?
1. Turbojet aircraft
2. Turbofan aircraft
3. Helicopters
The drive shaft itself must also carry ?
1. Tension loads
2. Compression loads
3. Torsion loads
The power plant is controlled between ground and ﬂight idle by the ?
1. Free turbine governor
2. Throttle twist grip
3. Auto governor
The N1 system will speed up and slow down as a function of ?
1. N2
2. N7
3. N4
The collective stick, when raised, the angle of attack of all rotor blades ?
1. not related to stick
2. will decrease
3. will increase
The _____ allows for small movements between the engines and the transmission ?
1. Fexible coupling
2. A sprag clutch
3. Rigid coupling
Helicopter rotors tend to rotate at ?
1. 3000-4000 rpm
2. 300-400 rpm
3. 1600-1700 rpm
About___________ of the energy produced by a helicopter turbo shaft engine is used to operate the gas generator ?
1. Half
2. Two thirds
3. One thirds
The function of ----- is to reduce the high rpm from the engine to a propeller RPM ?
1. Propeller speed governor
2. Power lever
3. Reduction gear assembly